![]() |
Setting up a Lock Miter Bit with the GrooveCenter (here is the page) requires a digital caliper to determine the off-set. This works well but requires three hands! |
![]() |
It’s much easier to make small spacers, each for a specific Lock Miter Bit with the exact offset size. Here are the two spacers for the big Freud and the small CMT bits. |
![]() |
This is the one for the CMT bit, the Magic Number is 0.600”. |
![]() |
And the bigger one for the Freud bit: M = 0.850”. |
![]() |
The spacer drops in the track and registers the offset. |
![]() |
This works really well! |
Related Articles