![]() |
The Depth Gauge measures the height of cut of this straight bit. Stable on its wide feet and keeping the registered distance, the setting is easily. |
![]() |
Using the Depth Gauge in the horizontal mode measures the distance to the fence. |
![]() |
A Tongue & Groove operation is made easy. The flat end of the pin is brought to exactly the right distance and height (by twisting the feet) for subsequent set-up of the tongue bit. |
![]() |
The Depth Gauge kept its setting and can now be used to exactly place the mating bit. The pin fits in between the two cutters. |
![]() |
Here is another look, the feet are twisted to bring the pin to exactly the right height, leaving the woodworker’s hands free to move the router and the fence until the pin fits smoothly in between the cutters. |
![]() |
Having set the fence depth for this Lock Miter Bit with the GrooveCenter, the Depth Gauge registers this depth, with the feet twisted to hit exactly the right height… |
![]() |
…and indicates this setting to the vertical distance from the table surface. |
Related Articles